Milford Air Conditioning Repairs Contractor Tips – Common Problems and Tips for Fixing Them
Monday, March 24, 2014
If you are a homeowner, you probably would like to learn some minor fixes for appliances that are easy enough to tackle on your own, including simple air conditioning repairs. Not only so you’ll save money, but so you’ll understand more about the equipment providing your indoor comfort. The task may be intimidating at first, but it will become handy after you have found out what the problem seems to be. But whenever in doubt, ALWAYS contact a professional Milford air conditioning repairs company! Some “simple fixes” aren’t so simple, and attempting to repair your air conditioner may lead to further, more costly damages than you originally started with…so unless it’s some easy like cleaning or replacing the filter, leave the AC repairs to the professionals in Milford, CT.
To get you started, here are the common problems that many central air conditioners in Milford, CT encounter and techniques from professional Milford air conditioning repairs contractors on how to address those problems.
1. The appliance will not turn on. When you encounter this problem, you must first check the thermostat settings. Check to see if it is set in Cool and not turned off or set in Heat position. The setting should also be below the temperature of the room.
If not the thermostat, the problem may also be due to blown fuse or circuit breaker. In this case, you must check the circuit breaker that is handling the condensing unit and compressor of the air conditioner and make sure that this is turned on. If the breaker has popped, you need to reset it. In the case of a blown fuse, you have to replace it. When these simple steps of Milford air conditioning repairs for the problem did not work, it is best that you refer the case to a professional.
2. If the cooling vents produce poor air flow, the problem may be due to blocked or disconnected ductwork or air filter that is dirty. The air filter can be replaced or you can also opt to clean this.
If the problem is not with the air filter, then you have to inspect the ductwork. Look for any signs of disconnections and perform the needed Milford air conditioning repairs. The register dampers that are situated on the vents in each room must also be looked into to check if these are in open position.
3. If the system does not dehumidify in a sufficient manner, this may be due to the fact that your air conditioner may be oversized for your house. If this is the case, the unit turns on and off many times than usual. This problem can only be fixed by replacing the condensing unit.
If the air conditioning repairs seem to be simple and manageable, then do not be afraid to implement the task on your own. If it appears to be complicated, then you might as well opt for services from a professional Milford HVAC contractor to handle the problem than to let it persist until the problem gets more convoluted.