Milford Furnace Repairs – Common Problems & Fixes
Monday, March 24, 2014
When it comes to improving indoor comfort, many homeowners need to start with updating or maintaining their furnaces. The furnace is a widely used gas heating appliance in Southern Connecticut. The basic “workings” of a gas heating furnace start with what is essentially a fuel box which is used to ingest cold air in the room, filter it to produce a cleansing effect, raise its temperature according to the setting through a steel heat exchanger, and releases the processed air into the ductwork of your house through a blow motor installed in the device. Unfortunately, there are a lot of components in this process of heating that can degrade over time or break down altogether. That’s when you need to call a professional Milford furnace repairs company.
When it comes to dealing with the need for furnace repairs, you should first try to identify what is wrong with the furnace so you can better relay the information to the heating repairs technician. You may also find that it’s a simple enough fix that doesn’t require an emergency service call to a Milford HVAC contractor. Let’s take a look at some of the common problems that lead to the need for calling a Milford furnace repairs company followed by the appropriate repair for the said problem.
The first problem several people commonly get is when the furnace does not produce heat. Some possible causes are when the thermostat is set low enough to cancel out the production of heat or when the thermostat itself is malfunctioning. A common cause of this problem furthermore is the tripping or blowing down of the circuit breaker controlling the furnace. This may also be caused by not opening or leaving the valve of the gas furnace control closed. To address this problem, a person may check the setting of the thermostat and setting it up properly to their desired level of heat.
Cleaning the filter and replacing blown fuse may also be done to resolve this problem. Another common problem with gas furnaces is the inadequate production of heat which is commonly due to dirty air filters. This can easily be resolved by thorough cleaning of the air filters. If the dirt is too much and produce severing damage then the air filter may be replaced with a new one. Another problem in gas furnaces is when it turns on and off too frequently which is commonly due to again, a dirty air filter, sometimes due to blow motor issues. This can be resolved by modulating the thermostat anticipator or by cleaning the dirty air filter. Another way to resolve this is to assess the oil blower which may need some lubrication.
Surely there are several problems when it comes to gas furnaces which would require a professional Milford furnace repairs technician’s services but these measures may be done by the owner himself if he is knowledgeable about the gas furnace and the specifications of it. When you design your home with this, make sure to check the quality before installing it for home improvement.